In 2016, Samsung released Galaxy Note 7 which was one of best smartphone of the year– until it began to catch fire. later, it was recalled and then discontinued. Now Samsung has released the next generation Note called Galaxy Note8, which gorgeous slab of curved metal and glass. It looks similar to Galaxy Note 8 design with more straight-edged and classy look. Today we will guide on How to Install Stock Firmware for Samsung Galaxy Note 8. We will use the tool officially distributed from Samsung for flashing Stock ROM on Samsung device called ODIN. ODIN is a very popular tool to flash stock firmware on any Samsung device. So in this guide, we will use the same tool to install Stock firmware on Galaxy Note 8.
Samsung Galaxy Note 8 features a 6.3-inch display with a resolution of 1440 x 2960 pixels. The display and back on the phone are protected by Corning Gorilla Glass 5. It is powered by 1.9GHz octa-core Exynos 8895/Qualcomm Snapdragon 835 processor coupled with 6 GB of RAM and runs on Adreno 540 Graphics. The smartphone comes with 64/128/256 GB of internal memory and can be expanded up to another 256GB via a microSD card. The Camera on Galaxy Note 8 sports Dual 12 MP rear camera and 8MP front facing for selfie lovers. The smartphone runs out of the box with Android 7.1.1 Nougat and backed by 3300 mah battery.
PRE-REQUISITE :
- This is for Samsung Galaxy Note 8 only.
- Your device must have 70% battery.
- You need a Laptop or PC to perform this Action.
- Download the right firmware for Note 8.
- Back Up your Data to make sure you have data’s in case if something Wrong (This Process won’t loose your data)
- Make sure you have followed the steps properly. Don’t Skip and Read! – We are not responsible for any damage that you make to your Phone.
DOWNLOAD THE FILES THAT REQUIRED :
- Download and Install the Samsung Kies Software: CLICK HERE or
- Download and Install Samsung USB Drivers: CLICK HERE
- Download and Extract the ODIN ZIP file on Desktop: CLICK HERE
ALSO RELATED POST
- How to Reboot your Samsung Galaxy Note 8 in Safe mode
- How to Enable USB Debugging on Galaxy Note 8
- How to perform forced reboot on Samsung Galaxy Note 8
- How to Wipe the Cache Partition Galaxy Note 8 via Recovery mode
- How to Change the Screen Mode on Galaxy Note 8
- How to Remove Bloatware from Samsung Galaxy Note 8
- Most common Samsung Galaxy Note 8 Problems and their solutions
- How to Fix Galaxy Note 8 Overheating and Battery Drain Problems
- How to Root Samsung Galaxy Note 8 With CF Auto Root
DOWNLOAD FILES
Steps For How To Install Stock Firmware for Samsung Galaxy Note 8 using ODIN
- If you have downloaded and installed the file from above then you are good to Go – Read from Step 2
- First of all, enable the USB Debugging
- To Enable the USB Debugging you need also active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
- Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging
- Open the Extracted ODIN File called ODIN v3.11.1 exe file using the Administrator – Right Click your mouse and Open using Administrator
- Now Reboot your Phone into Download Mode
- So First Turn your Phone off -> press and hold Home + Power + Volume Down buttons Until you see a download mode.
- Now Connect your Phone to PC using the USB Cables
- When you connect the USB cable you will see a blue sign in Odin
- Now Go back again Odin and Add the firmware which you downloaded from Above by Clicking AP/PDA Button
- Now Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)
- Click the start button, sit back and wait few minutes until you see a message pass. Once you see PASS then you can remove your Phone from the part. Don’t Panic if you see your Phone restarts while updating.
That’s ALL! When you restart your Phone you will have the new stock firmware installed on Galaxy Note 8. I hope you learned the procedure on How to Install Stock Firmware for Samsung Galaxy Note 8 using ODIN.
- First of all, enable the USB Debugging
- To Enable the USB Debugging you need also active the developer option, Now Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
- Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging
